VEMB10W

Description:

The Espen Technology VEMB10W Emergency Lighting Inverter works with Espen’s LED Flex (Type B) LED tubes in emergency system. The VEMB10W provides a maximum load of 10 Watts. It allows the connected fixture(s) to be on, off, switched or dimmed without affecting emergency operation. Each unit consists of electronic circuitry; lithium–Ion battery and charger enclosed in a steel case.

Electrical:

● Universal 120-277V AC, 50/60Hz Input
● Open Circuit Voltage 200VDC
● Charge/Power “ON” LED Indicator Light and Push-to-Test Switch for Code Compliance Testing
● Long Life, Maintenance Free, Lithium-Ion Battery
● Output Short and Overcurrent Protection: Electronic Limiting, with Normal Operation Resuming
● 90 Minute Minimum Emergency Operating Time Over Full Temperature Range
● 24 Hour Maximum Battery Recharge Time 

Installation:

● For Use with Switched or Un-Switched Fixtures
● Does Not Affect Normal Operation
● Emergency Driver and Lamps Must be Fed from Same Branch Circuit 

Warranty:

● 5 years
● Meets UL924

LED EMERGENCY DRIVER 10 Watt

    Contact Us

      ​Email:   info@atekdistribution.com

    Tel: 612-454-0042

    2360 Nevada Ave N, Suite D
    Minneapolis, MN 55427
    USA

    • Facebook
    • Twitter
    • Instagram
    • LinkedIn

    © 2020 by ATEK Distribution