Electric Vehicle Chargers with Breaker/Circuit Sharing


Want to learn something cool about EV Charging? I bet you didn’t know that ATEK Distribution has EV chargers from ZEF ENERGY that employ an automatic load management system that will allow for up to 4 chargers to run off a single feeder

and single breaker.

To learn more contact your local ATEK sales rep at info@atekdistribution.com or visit our website at www.atekdistribution.com.

Available on our website for purchase Click Here



How to run multiple chargers on a single feeder and Breaker

Breaker/Circuit Sharing

Created by: Matthew Blackler

Modified on: Wed, 10 Feb, 2021 at 6:06 PM

This article covers the common topic of how to run multiple chargers on a single feeder and breaker.

EV chargers such as ours employ an automatic load management system that will allow for up to 4 chargers to run off a single feeder and single breaker. This is allowable according to both the 2017 and 2020 NEC, in section 625.42.

2017 Code Language:

625.42 Rating. The equipment shall have sufficient rating to supply the load served. Electric vehicle charging loads shall be considered to be continuous loads for the purposes of this article. Where an automatic load management system is used, the maximum equipment load on a service and feeder shall be the maximum load permitted by the automatic load management system.

2020 Code Language:

625.42 Rating. The power transfer equipment shall have sufficient rating to supply the load served. Electric vehicle charging loads shall be considered to be continuous loads for the purposes of this article. Service and feeder shall be sized in accordance with the product ratings. Where an automatic load management system is used, the maximum equipment load on a service and feeder shall be the maximum load permitted by the automatic load management system.

Adjustable settings shall be permitted on fixed-in-place equipment only. If adjustments have an impact on the rating label, those changes shall be in accordance with manufacturer’s instructions, and the adjusted rating shall appear with sufficient durability to withstand the environment involved on the rating label. Electric vehicle supply equipment with restricted access to an ampere adjusting means shall be permitted to have ampere ratings that are equal to the adjusted current setting. Sizing the service and feeder to match the adjusting means shall be permitted. Restricted access shall prevent the user from gaining access to the adjusting means. Restricted access shall be accomplished by at least one of the following:

(1) A cover or door that requires the use of a tool to open

(2) Locked doors accessible only to qualified personnel

(3) Password protected commissioning software accessible only to qualified personnel

____________________

Up to 4 chargers can be run off a single circuit, and this is specified in the commissioning of the units in the password protected software platform, ZEFNET (utility.zefenergy.com). When specifying a breaker at a specific location during the commissioning process within the ZEFNET osftware, if the second charger is being commissioned on a circuit, a selection box allowing for a pre-existing breaker to be selected means the automatic load management system will recognize the each successive charger will be associated with the circuit breaker selected. The management system will dispatch the appropriate commands to ensure the chargers stay within the tolerances of the specified breaker rating, as entered into the commissioning software in the online ZEFNET portal.



8 views0 comments
Contact Us

  ​Email:   info@atekdistribution.com

Tel: 612-454-0042

2360 Nevada Ave N, Suite D
Minneapolis, MN 55427
USA

  • Facebook
  • Twitter
  • Instagram
  • LinkedIn

© 2020 by ATEK Distribution